Driveway Sealing Process Step-by-Step (What to Expect on Job Day)

Day before

• We confirm the appointment by phone or text
• We check the weather window (no rain expected for 24h after)
• You move vehicles and trailers off the driveway

Morning of (arrival)

1. Walk the driveway with you, point out cracks and prep needs
2. Block off with cones and signage
3. Edge and brush the perimeter and surface
4. Blow the entire driveway clean

Mid-morning (prep)

1. Spot-treat oil stains with degreaser
2. Hot rubber crack fill — every visible crack
3. Edge boards placed along garage, walkways, curbs

Sealcoating

1. Spray premium oil-based sealer at full strength — never diluted
2. Detail by hand at edges, corners, and around obstructions
3. Inspect the finish — touch up any thin spots

Afternoon (cure)

1. Barricades and signage stay up for 24 hours minimum
2. Walk-on time: usually 4–6 hours
3. Drive-on time: 24 hours (cooler weather may extend this)

Next day

• Remove barricades
• Drive carefully for the first few days (avoid sharp turns)
• Enjoy a brand-new looking driveway

Bottom line

Most Barrie residential sealing jobs take 2–4 hours of on-site work. The cure window is the most important part — 24 hours of patience protects the finish for years.